On the Architecture of Smart and Orderly Power Consumption Management Platform Based on Smart and Orderly Power Consumption Devices

Chen Yange

Abstract


In view of the problems like poor dynamic flexibility of grid, and the lack of real-time information interaction between power consumption devices and power supply devices, and among power consumption devices, this paper puts forward a smart and orderly power consumption management platform based on smart and orderly power consumption devices through R&D of smart and orderly power consumption which centers on smart grid and aims at utilizing low-carbon energy, and also proposes the optimization model. Dedicated to achieving the real-time information interaction between power consumption devices and power supply devices, and among power consumption devices, the platform uses smart and orderly power consumption management devices to send information to the smart and orderly power consumption management system through a wired or wireless network—the network itself and the remote smart and orderly power consumption management system are wired together or connected wirelessly—so that the automatic electrical load of power consumption equipment could be adjusted in a smart and orderly fashion at the side of transformer-based consumers in accordance with the electrical load curve of the distribution network.


Full Text:

PDF

References


Alirezaei G., Taghizadeh O., Mathar R. (2015). Lifetime and power consumption analysis of sensor networks, IEEE International Conference on Wireless for Space and Extreme Environments, Doi: 10.1109/WiSEE.2015.7392980.

Chen Y.G. (2016). Smart and Orderly Power Consumption management system and method based on Smart and Orderly Power device, ZL201410360517.1(6) in China, 1-14.

El-Khazali R., Tawalbeh N. (2016). Discrete-time fractional-order power system stabilizers, Proceedings of the 18th Mediterranean Electrotechnical Conference: Intelligent and Efficient Technologies and Services for the Citizen, MELECON 2016, June 20.

Forero F., Gomez A., Champac V. (2016). A methodology for NBTI circuit reliability at reduced power consumption using dual supply voltage, LATS 2016-17th IEEE Latin-American Test Symposium, Doi: 10.1109/LATW.2016.7483344.

Georigios L. (2015). Modelling and Simulation of Electric Power Transmission Line Voltage, Advances in Modelling and Analysis A, 88(1), 71-83.

Guo B. (2015). Research on Optimal Load Management with DSM, North China Electric Power University Master’s thesis, 36-42.

Hema R., Bindu G.R. (2014). Pre-Determination and Experimental Verification of Voltage Regulation from the Output Equivalent Circuit in a Forced Resonant Inductive Coupled Wireless Power Transfer System, Advances in Modelling and Analysis A, 87(3), 10-29.

Heydt G.T., Pierre B.J. (2016). Sequence impedances for high phase order power transmission systems, Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, Doi: 10.1109/TDC.2016.7519990.

Huang M.S., Ma Y., Lu L.J. (2015). Orderly Power transformer station terminal design based flushbonading LINUX, Electrical logging and instrument, 52(16), 107-116.

Huang T., Bai Y.W., Hsu P.Y. (2015). Reducing the standby power consumption of the S3 State for PCs, IEICE Transactions on Electronics, Doi: 10.1587/transele.E98.C.952.

Huang Y.T. (2013). Research on Load Profile Analysis and Load Management Optimization, Zhejiang University Master’s thesis, 31-44.

Liu W. (2015). Research on Power Supply-Demand Early Warning and Load Optimization in Bejing Area, Beijing Jiaotong University Master’s thesis, 37-52.

Lu T.T., Gao C.W., Su W.H. (2013). Optimal scheduling of peak load shifting by orderly power consumption management, POWER DSM, 15(6), 15-22．

Maehara K., Hirotani K., Sagara N. (2016). Influence of fan multi zone VAV system on room temperature and fan power consumption, AIJ Journal of Technology and Design, Doi: 10.3130/aijt.22.621.

Pierre B.J., Heydt G.T. (2014). Transposition and voltage unbalance in high phase order power transmission systems, Electric Power Components and Systems, Doi: 10.1080/15325008.2014.949915.

Umamaheswari M.G. (2011). Design and implementation of reduced-order sliding mode controller for higher-order power factor correction converters, IET Power Electronics, Doi:10.1049/iet-pel.2010.0286.

Wang J., Hu Z.Y. (2012). Optimization and application of the management mode of orderly electricity consumption, POWER DSM, 14(3), 38-39．

Xiao J.H. (2012). Implementation of orderly power consumption by energy information collection system, POWER DSM, 14(5), 57-58．

Xu D.D. (2016). Research on Optimization of Electricity Load Management based on Time Elasticity, Shenyang University Master’s thesis, 43-51.

Yao H., Yuan F. (2014). Power System Transient Stability Enhancement with SMES Using Four Quadrant Active and Reactive Power Control, Advances in Modelling and Analysis C, 69(1), 12-27.

Zheng Y.D. (2014). The development status of the power demand side management to the enterprise node, Science and technology innovation and Application, 10(6), 30-36.

Zhu W., Ru l., Chen J.Y. (2014). Research on orderly power utilization scheduling strategy, Journal of Electric Power Science and Technology, 29(1), 37-40．


Refbacks

  • There are currently no refbacks.


Revista de la Facultad de Ingeniería,

ISSN: 2443-4477; ISSN-L:0798-4065

Edif. del Decanato de la Facultad de Ingeniería,

3º piso, Ciudad Universitaria,

Apartado 50.361, Caracas 1050-A,

Venezuela.

© Universidad Central de Venezuela